Skip to main content

Positive answer for a conjecture about stabilizable means

Abstract

In an earlier paper (Raïssouli in Appl. Math. E-Notes 11:159-174, 2011), the author conjectured that for given stable means m 1 and m 2 such that m 1 m 2 , there exists a unique ( m 1 , m 2 )-stabilizable mean satisfying that m 1 m m 2 . In the present paper, a positive answer of this conjecture is given. Some examples, illustrating the theoretical study, are discussed.

MSC:26E60.

1 Introduction

In the recent past, the theory of means has been the subject of intensive research. Stability and stabilizability concepts for means have been recently introduced by the author in [1]. It has been proved to be a useful tool for theoretical viewpoint as well as for practical purposes [24]. In this section, we recall some basic notions about means in two variables that will be needed later. We understand by (bivariate) mean a binary map m between positive real numbers satisfying the following statements:

  1. (i)

    m(a,a)=a for all a>0;

  2. (ii)

    m(a,b)=m(b,a) for all a,b>0;

  3. (iii)

    m(ta,tb)=tm(a,b) for all a,b,t>0;

  4. (iv)

    m(a,b) is an increasing function in a (and in b);

  5. (v)

    m(a,b) is a continuous function of a and b.

The maps (a,b)min(a,b) and (a,b)max(a,b) are (trivial) means which are denoted by min and max, respectively. The standard examples of means are given in the following, see [524] for instance.

A : = A ( a , b ) = a + b 2 ; G : = G ( a , b ) = a b ; H : = H ( a , b ) = 2 a b a + b ; L : = L ( a , b ) = b a ln b ln a , L ( a , a ) = a ; I : = I ( a , b ) = 1 e ( b b a a ) 1 / ( b a ) , I ( a , a ) = a ;

and are known as the arithmetic, geometric, harmonic, logarithmic and identric means, respectively.

For two means m 1 and m 2 , we write m 1 m 2 if and only if m 1 (a,b) m 2 (a,b) for every a,b>0 and m 1 < m 2 if and only if m 1 (a,b)< m 2 (a,b) for all a,b>0 with ab. The above means satisfy the known chain of inequalities

min<H<G<L<I<A<max.

We say that m is a strict mean if m(a,b) is strictly increasing in a and in b. Also, every strict mean m satisfies that m(a,b)=aa=b. It is not hard to check that the trivial means min and max are not strict, while A, G, H, L, I, S, C are strict means.

For the sake of simplicity for the reader, we end this section by recalling some basic notions and results stated by the author in an earlier paper [1] and needed in the sequel.

Definition 1.1 Let m 1 , m 2 and m 3 be three given means. For all a,b>0, define

R( m 1 , m 2 , m 3 )(a,b)= m 1 ( m 2 ( a , m 3 ( a , b ) ) , m 2 ( m 3 ( a , b ) , b ) ) ,

called the resultant mean-map of m 1 , m 2 and m 3 .

A study investigating the elementary properties of the resultant mean-map was stated in [1]. Here, we just recall the following result needed later.

Proposition 1.1 Let m 1 , m 2 and m 3 be three means. Then the map (a,b)R( m 1 , m 2 , m 3 )(a,b) defines a mean. Further the mean-map ( m 1 , m 2 , m 3 )R( m 1 , m 2 , m 3 ) is point-wisely increasing with respect to each of its mean variables, that is,

( m 1 m 1 , m 2 m 2 , m 3 m 3 ) R( m 1 , m 2 , m 3 )R ( m 1 , m 2 , m 3 ) .
(1.1)

In [1, 4], the author gives a lot of examples about computations of R( m 1 , m 2 , m 3 ) when m 1 , m 2 and m 3 are means belonging to the set of the above standard means.

As proved in [1, 3, 4], and will be again shown throughout this paper, the resultant mean-map stems its importance in the fact that it is a good tool for introducing the stability and stabilizability concepts as recalled below.

Definition 1.2 A mean m is said to be:

  1. (a)

    stable if R(m,m,m)=m;

  2. (b)

    stabilizable if there exist two nontrivial stable means m 1 and m 2 satisfying the relation R( m 1 ,m, m 2 )=m. We then say that m is ( m 1 , m 2 )-stabilizable.

In [1, 3], the author stated a developed study about the stability and stabilizability of the above standard means. In particular, he proved the following.

Theorem 1.2 With the above, the following assertions hold true:

  1. (1)

    The arithmetic, geometric and harmonic means A, G and H are stable.

  2. (2)

    The logarithmic mean L is (H,A)-stabilizable and (A,G)-stabilizable.

  3. (3)

    The identric mean I is (G,A)-stabilizable.

2 Two needed results

The next definition [2], recalling another concept for means, will be needed in the sequel.

Definition 2.1 Let m 1 and m 2 be two means. The tensor product of m 1 and m 2 is the map, denoted m 1 m 2 , defined by

a,b,c,d>0 m 1 m 2 (a,b,c,d)= m 1 ( m 2 ( a , b ) , m 2 ( c , d ) ) .

A mean m will be called cross mean if the map m 2 :=mm is symmetric with its four variables.

It is proved in [1] that every cross mean is stable. The reverse of this latter assertion is still an open problem.

Now, let m 1 , m 2 and m 3 be three given means. For the sake of simplicity, we set

M( m 1 , m 2 , m 3 ):= m 1 ( m 2 , m 3 ),

in the sense that

M( m 1 , m 2 , m 3 )(a,b):= m 1 ( m 2 ( a , b ) , m 3 ( a , b ) )
(2.1)

for all a,b>0.

Clearly, M( m 1 , m 2 , m 2 )= m 2 for all means m 1 and m 2 . If m 1 is a strict mean, then M( m 1 , m 2 , m 3 )= m 2 (resp. M( m 1 , m 2 , m 3 )= m 3 ) if and only if m 2 = m 3 . Further, we have M( m 1 , m 2 , m 3 )=M( m 1 , m 3 , m 2 ) for all means m 2 and m 3 .

The next result will be of interest later.

Proposition 2.1 Let m 1 and m 2 be two given means. Assume that m 1 is a cross mean, then we have

R( m 1 , m 1 , m 2 )=M( m 1 , m 1 , m 2 ).

Proof By Definition 1.1 and Definition 1.2, one has, for all a,b>0,

R ( m 1 , m 1 , m 2 ) ( a , b ) = m 1 ( m 1 ( a , m 2 ( a , b ) ) , m 1 ( m 2 ( a , b ) , b ) ) = m 1 m 1 ( a , m 2 ( a , b ) , m 2 ( a , b ) , b ) .

Since m 1 is a cross mean, then

R ( m 1 , m 1 , m 2 ) ( a , b ) = m 1 m 1 ( a , b , m 2 ( a , b ) , m 2 ( a , b ) ) = m 1 ( m 1 ( a , b ) , m 2 ( a , b ) ) = M ( m 1 , m 1 , m 2 ) ( a , b ) ,

which concludes the proof. □

The above proposition implies again that every cross mean is stable. The next theorem is more interesting.

Theorem 2.2 Let m 1 , m 2 , m 3 and m 4 be four given means. Assume that m 1 is a cross mean, then the following holds:

R ( m 1 , M ( m 1 , m 3 , m 4 ) , m 2 ) =M ( m 1 , R ( m 1 , m 3 , m 2 ) , R ( m 1 , m 4 , m 2 ) ) .
(2.2)

Proof By Definition 1.1, we have, for all a,b>0,

R ( m 1 , M ( m 1 , m 3 , m 4 ) , m 2 ) ( a , b ) = m 1 ( M ( m 1 , m 3 , m 4 ) ( a , m 2 ( a , b ) ) , M ( m 1 , m 3 , m 4 ) ( m 2 ( a , b ) , b ) ) ,

which with (2.1) gives

R ( m 1 , M ( m 1 , m 3 , m 4 ) , m 2 ) ( a , b ) = m 1 ( m 1 ( m 3 ( a , m 2 ( a , b ) ) , m 4 ( a , m 2 ( a , b ) ) ) , m 1 ( m 3 ( m 2 ( a , b ) , b ) , m 4 ( m 2 ( a , b ) , b ) ) ) .

Since m 1 is a cross mean, then we have

R ( m 1 , M ( m 1 , m 3 , m 4 ) , m 2 ) ( a , b ) = m 1 ( m 1 ( m 3 ( a , m 2 ( a , b ) ) , m 3 ( m 2 ( a , b ) , b ) ) , m 1 ( m 4 ( a , m 2 ( a , b ) ) , m 4 ( m 2 ( a , b ) , b ) ) ) .

Again, by Definition 1.1 and (2.1), respectively, we obtain

R ( m 1 , M ( m 1 , m 3 , m 4 ) , m 2 ) ( a , b ) = m 1 ( R ( m 1 , m 3 , m 2 ) ( a , b ) , R ( m 1 , m 4 , m 2 ) ( a , b ) ) = M ( m 1 , R ( m 1 , m 3 , m 2 ) , R ( m 1 , m 4 , m 2 ) ) ( a , b ) ,

which completes the proof. □

In [1], for defining an ( m 1 , m 2 )-stabilizable mean, the author imposed that the means m 1 and m 2 should be nontrivial and stable. The fact that m 1 and m 2 are nontrivial is clear since the relation R(min,m,max)=m is valid for every mean m. However, the fact that m 1 and m 2 are stable was imposed only in the aim to characterize a stabilizable mean m (as L and I) in terms of m 1 and m 2 having simple expressions (as A, G and H). As example, we know that L is (H,A)-stabilizable, where H and A are (stable) means having expressions more simple as that of L. Analogous way for the fact that L is (A,G)-stabilizable and I is (G,A)-stabilizable can be stated.

3 Existence and uniqueness of a stabilizable mean

In [1], the author stated the following conjecture.

Conjecture Let m 1 and m 2 be two nontrivial stable means such that m 1 m 2 . Then there exists one and only one mean m, which is ( m 1 , m 2 )-stabilizable, satisfying that m 1 m m 2 .

The aim of this section is to prove that the above conjecture is true when we add convenient hypotheses for the means m 1 and m 2 . Of course, following Definition 1.2, m 1 and m 2 will be assumed to be stable means. We can ask why it is interesting to solve the above conjecture. In fact, as we have seen before, the means L and I, having complicated expressions, are stabilizable with respect to A, G, H whose expressions are more simple. It follows that if for given (simple) means m 1 and m 2 we show that there exists a unique ( m 1 , m 2 )-stabilizable mean, we can then characterize new means in terms of known (simple) means. This can be also useful when we speak for means involving several variables or those with operator arguments, of course if the above conjecture can be extended for these classes of generalized means.

Before giving an affirmative response that we are waiting for, we state some needed notions. A sequence ( m n ) n of means will be called point-wise convergent (in short, p-convergent) if, for all a,b>0, the real sequence ( m n ( a , b ) ) n converges. Setting m (a,b)= lim n m n (a,b), it is easy to see that m is a mean. Similarly, we define the point-wise monotonicity of ( m n ) n . By virtue of the double inequality

min(a,b) m n (a,b)max(a,b),

we deduce that every p-increasing (resp. p-decreasing) sequence ( m n ) n is p-convergent.

Now, let m 1 and m 2 be two given means and define the following two mean-sequences:

{ Θ n + 1 = R ( m 1 , Θ n , m 2 ) , n 0 , Θ 0 = m 1 , ϒ n + 1 = R ( m 1 , ϒ n , m 2 ) , n 0 , ϒ 0 = m 2 .
(3.1)

By mathematical induction, it is not hard to check that Θ n and ϒ n are means for every n0. In the following, we study the p-convergence of the mean-sequences ( Θ n ) n and  ( ϒ n ) n . We may state the next result.

Proposition 3.1 Let m 1 and m 2 be two stable means with m 1 m 2 . Then the following mean-inequalities

m 1 Θ n 1 Θ n ϒ n ϒ n 1 m 2
(3.2)

hold for all n1. Consequently, the mean-sequences ( Θ n ) n and ( ϒ n ) n both p-converge.

Proof Since Θ 0 := m 1 m 2 := ϒ 0 , we deduce by simple mathematical induction, with the help of (1.1), that Θ n ϒ n for each n0. Now, using the fact that m 1 is stable, we can write, again with help of (1.1),

Θ 0 = m 1 =R( m 1 , m 1 , m 1 )R( m 1 , m 1 , m 2 )=R( m 1 , Θ 0 , m 2 )= Θ 1 .

This, with mathematical induction, shows that Θ n 1 Θ n for each n1. Analogously, we prove that ϒ n ϒ n 1 for every n1. Summarizing, we deduce that ( Θ n ) n is a p-increasing sequence p-upper bounded by m 2 , while ( ϒ n ) n is a p-decreasing sequence p-lower bounded by m 1 . Then the desired result follows, and so this completes the proof. □

We explicitly notice that the above mean-sequences ( Θ n ) n and ( ϒ n ) n p-converge for all comparable means m 1 and m 2 , i.e., m 1 m 2 (or m 2 m 1 , see Remark 3.1 below). Now, a natural question arises from the above: under what conditions on m 1 and m 2 do the p-limits of ( Θ n ) n and ( ϒ n ) n coincide? In what follows, we are interested in finding a positive answer to this question.

Proposition 3.2 Let m 1 and m 2 be two means. Assume that m 1 is a cross mean, then the mean-sequences ( Θ n ) n and ( ϒ n ) n satisfy the following relationship:

n0 Θ n + 1 =M( m 1 , Θ n , ϒ n ):= m 1 ( Θ n , ϒ n ).
(3.3)

Proof We use mathematical induction. For n=0, by (3.1) and Proposition 2.1, we have

Θ 1 =R( m 1 , Θ 0 , m 2 )=R( m 1 , m 1 , m 2 )=M( m 1 , m 1 , m 2 )=M( m 1 , Θ 0 , ϒ 0 ).

Assume that (3.3) is true for n, by (3.1) we obtain

Θ n + 2 =R( m 1 , Θ n + 1 , m 2 )=R ( m 1 , M ( m 1 , Θ n , ϒ n ) , m 2 ) .

This, with Theorem 2.2, yields

Θ n + 2 =M ( m 1 , R ( m 1 , Θ n , m 2 ) , R ( m 1 , ϒ n , m 2 ) ) =M( m 1 , Θ n + 1 , ϒ n + 1 ),

so proving the desired result. □

Now, we are in a position to state the next result.

Theorem 3.3 Let m 1 and m 2 be two stable means with m 1 m 2 . Assume further that m 1 is strict and a cross mean. Then, the mean-sequences ( Θ n ) n and ( ϒ n ) n both p-converge to the same limit m which is ( m 1 , m 2 )-stabilizable and satisfying m 1 m m 2 .

Proof According to Proposition 3.1, the sequences ( Θ n ) n and ( ϒ n ) n both p-converge. Call their limits Θ and ϒ, respectively. By the continuity of m 1 , relationship (3.3) gives, when n, Θ= m 1 (Θ,ϒ). This, with the fact that m 1 is strict, yields Θ=ϒ:=m. Letting n in the first (or second) relation of (3.1), we obtain, with the help of continuity of m 1 , m=R( m 1 ,m, m 2 ), which means that m is ( m 1 , m 2 )-stabilizable. Inequalities (3.2) imply that m 1 m m 2 , which completes the proof. □

Corollary 3.4 Let m 1 and m 2 be as in the above theorem. Let m be a ( m 1 , m 2 )-stabilizable mean such that m 1 m m 2 . Then m is the common p-limit of the above sequences ( Θ n ) and ( ϒ n ).

Proof We show, by mathematical induction, that Θ n m ϒ n for all n0. For n=0, it is true by virtue of Θ 0 = m 1 m m 2 =ϒ. Assume that Θ n m ϒ n , the recursive relations (3.1), with the help of (1.1), give

Θ n + 1 =R( m 1 , Θ n , m 2 )R( m 1 ,m, m 2 )R( m 1 , ϒ n , m 2 )= ϒ n + 1 .

This, with the fact that m is ( m 1 , m 2 )-stabilizable, i.e., m=R( m 1 ,m, m 2 ), yields Θ n + 1 m ϒ n + 1 . It follows that Θ n m ϒ n for all n0. Since the sequences ( Θ n ) and ( ϒ n ) both p-converge to the same limit, we deduce the desired result. □

The above corollary tells us that every ( m 1 , m 2 )-stabilizable mean is the common p-limit of the above sequences ( Θ n ) and ( ϒ n ). This, with the uniqueness of the p-limit, implies immediately the next result, which gives an affirmative answer of the above conjecture.

Corollary 3.5 Let m 1 and m 2 be as in the above theorem. Then there exists one and only one ( m 1 , m 2 )-stabilizable mean m such that m 1 m m 2 .

Remark 3.1 (i) If the means m 1 and m 2 are such that m 1 m 2 , analogous results as those above can be stated in a similar way. We leave to the reader the task to formulate these results in a detailed manner. In particular, with convenient means m 1 and m 2 , there exists one and only one ( m 1 , m 2 )-stabilizable mean satisfying that m 2 m m 1 .

(ii) For m 1 and m 2 as in the above theorem, the last corollary tells us that the map mR( m 1 ,m, m 2 ) has one and only one mean-fixed point.

Example 3.1 As already pointed, the mean L is (H,A)-stabilizable. Following the above study, L is the unique (H,A)-stabilizable mean satisfying HLA, and so L can be characterized as the p-limit of an iterative algorithm involving the simple means H and A. The same can be said for the other stabilizable means mentioned in Theorem 2.2. We leave it for the reader to give more details about this latter point in a similar manner as previously explained.

It is worth mentioning that the reader will do well in distinguishing between the following two situations:

  1. (a)

    There exists one and only one ( m 1 , m 2 )-stabilizable mean for suitable means m 1 and m 2 as previously showed.

  2. (b)

    A given mean m can be ( m 1 , m 2 )-stabilizable and ( m 1 , m 2 )-stabilizable for two distinct couples ( m 1 , m 2 ) and ( m 1 , m 2 ). Indeed, as already pointed before, the logarithmic mean L is simultaneously (A,G)-stabilizable and (H,A)-stabilizable.

Finally, the following is of interest: Let m 1 and m 2 be as in the above theorem. For every mean m, we set

Λ m 1 m 2 (m)=R( m 1 ,m, m 2 ).

Then, for fixed means m 1 and m 2 , Λ m 1 m 2 defines a map from the set of means into itself. If ( Λ m 1 m 2 ) ( n ) denotes the n-iterate of Λ m 1 m 2 , i.e., ( Λ m 1 m 2 ) ( 0 ) (m)=m and, for n1,

( Λ m 1 m 2 ) ( n ) = Λ m 1 m 2 Λ m 1 m 2 Λ m 1 m 2 ( n  times of  Λ m 1 m 2 ) ,

then the above study tells us that every ( m 1 , m 2 )-stabilizable mean m can be written as

m= lim n ( Λ m 1 m 2 ) ( n ) ( m 1 )= lim n ( Λ m 1 m 2 ) ( n ) ( m 2 )

for the point-wise limit. Further, the following iterative inequalities hold true (if m 1 m 2 ):

n1 ( Λ m 1 m 2 ) ( n 1 ) ( m 1 ) ( Λ m 1 m 2 ) ( n ) ( m 1 )m ( Λ m 1 m 2 ) ( n ) ( m 2 ) ( Λ m 1 m 2 ) ( n 1 ) ( m 2 ).

Example 3.2 L is (H,A)-stabilizable. Then we have

n1 ( Λ H A ) ( n 1 ) (H) ( Λ H A ) ( n ) (H)L ( Λ H A ) ( n ) (A) ( Λ H A ) ( n 1 ) (A).

Simple computations lead to

Λ H A (H)= 2 G 2 A + H , Λ H A (A)= 3 4 A+ 1 4 H.

We then obtain

H 2 G 2 A + H L 3 4 A+ 1 4 HA,

which refines HLA. The procedure can be continued for obtaining more iterative refinements for this latter double inequality.

References

  1. Raïssouli M: Stability and stabilizability for means. Appl. Math. E-Notes 2011, 11: 159-174.

    MathSciNet  Google Scholar 

  2. Raïssouli M: Approaching the power logarithmic and difference means by algorithms involving the power binomial mean. Int. J. Math. Math. Sci. 2011., 2011: Article ID 687825

    Google Scholar 

  3. Raïssouli M: Stabilizability of the Stolarsky mean and its approximation in terms of the power binomial mean. Int. J. Math. Anal. 2012, 6(18):871-881.

    Google Scholar 

  4. Raïssouli M: Refinements for mean-inequalities via the stabilizability concept. J. Inequal. Appl. 2012., 2012: Article ID 55

    Google Scholar 

  5. Bullen PS: Handbook of Means and Their Inequalities. Kluwer Academic, Dordrecht; 2003.

    Book  Google Scholar 

  6. Chu Y-M, Long B-Y: Bounds for the Neuman-Sándor mean using power and identric means. Abstr. Appl. Anal. 2013., 2013: Article ID 832591

    Google Scholar 

  7. Chu Y-M, Long B-Y, Gong W-M, Song Y-Q: Sharp bounds for Seiffert and Neuman-Sándor means in terms of generalized logarithmic means. J. Inequal. Appl. 2013., 2013: Article ID 10

    Google Scholar 

  8. Chu Y-M, Shi M-Y, Jiang Y-P: Optimal inequalities for power, harmonic and logarithmic means. Bull. Iran. Math. Soc. 2012, 38(3):597-606.

    MathSciNet  Google Scholar 

  9. Chu Y-M, Wang M-K: Optimal Lehmer mean bounds for the Toader mean. Results Math. 2012, 61(3-4):223-229. 10.1007/s00025-010-0090-9

    Article  MathSciNet  Google Scholar 

  10. Chu Y-M, Wang M-K, Wang Z-K: Best possible inequalities among harmonic, geometric, logarithmic and Seiffert means. Math. Inequal. Appl. 2012, 15(2):415-422.

    MathSciNet  Google Scholar 

  11. Chu Y-M, Wang M-K, Qiu S-L: Optimal combinations bounds of root-square and arithmetic means for Toader mean. Proc. Indian Acad. Sci. Math. Sci. 2012, 122(1):41-51. 10.1007/s12044-012-0062-y

    Article  MathSciNet  Google Scholar 

  12. Chu Y-M, Xia W-F: Two optimal double inequalities between power mean and logarithmic mean. Comput. Math. Appl. 2010, 60(1):83-89. 10.1016/j.camwa.2010.04.032

    Article  MathSciNet  Google Scholar 

  13. Chu Y-M, Wang M-K, Gong W-M: Two sharp double inequalities for Seiffert mean. J. Inequal. Appl. 2011., 2011: Article ID 44

    Google Scholar 

  14. Hu H-N, Tu G-Y, Chu Y-M: Optimal bounds for Seiffert mean in terms of one-parameter means. J. Appl. Math. 2012., 2012: Article ID 917120

    Google Scholar 

  15. Li Y-M, Long B-Y, Chu Y-M: Sharp bounds for the Neuman-Sándor mean in terms of generalized logarithmic mean. J. Math. Inequal. 2012, 6(4):567-577.

    Article  MathSciNet  Google Scholar 

  16. Neuman E: On one-parameter family of bivariate means. Aequ. Math. 2012, 83(1-2):191-197. 10.1007/s00010-011-0099-5

    Article  MathSciNet  Google Scholar 

  17. Neuman E: A note on a certain bivariate mean. J. Math. Inequal. 2012, 6(4):637-643.

    Article  MathSciNet  Google Scholar 

  18. Neuman E: Inequalities for the Schwab-Borchardt mean and their applications. J. Math. Inequal. 2011, 5(4):601-609.

    Article  MathSciNet  Google Scholar 

  19. Neuman E, Sándor J: Companion inequalities for certain bivariate means. Appl. Anal. Discrete Math. 2009, 3(1):46-51. 10.2298/AADM0901046N

    Article  MathSciNet  Google Scholar 

  20. Qiu Y-F, Wang M-K, Chu Y-M: Two sharp inequalities for Lehmer mean, identric mean and logarithmic mean. J. Math. Inequal. 2011, 5(3):301-306.

    Article  MathSciNet  Google Scholar 

  21. Raïssouli M, Sándor J: On a method of construction of new means with applications. J. Inequal. Appl. 2013., 2013: Article ID 89

    Google Scholar 

  22. Shi H-X, Long B-Y, Chu Y-M: Optimal generalized Heronian mean bounds for the logarithmic mean. J. Inequal. Appl. 2012., 2012: Article ID 63

    Google Scholar 

  23. Wang M-K, Wang Z-K, Chu Y-M: An optimal double inequality between geometric and identric means. Appl. Math. Lett. 2012, 25(3):471-475. 10.1016/j.aml.2011.09.038

    Article  MathSciNet  Google Scholar 

  24. Zhao T-H, Chu Y-M, Liu B-Y: Optimal bounds for Neuman-Sándor mean in terms of the convex combinations of harmonic, geometric, quadratic, and contraharmonic means. Abstr. Appl. Anal. 2012., 2012: Article ID 302635

    Google Scholar 

Download references

Acknowledgements

Many thanks to the anonymous referee for bringing us some recent references. This work was supported by the Research Center of Taibah University (No. 4625/2013).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Mustapha Raïssouli.

Additional information

Competing interests

The author declares that he has no competing interests.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Raïssouli, M. Positive answer for a conjecture about stabilizable means. J Inequal Appl 2013, 467 (2013). https://doi.org/10.1186/1029-242X-2013-467

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1029-242X-2013-467

Keywords